AWQ-104L Digital Acupunctoscope Point Locator and stimulation device for acupuncture
Point Locator and stimulation device for acupuncture. The digital display shows the frequency in Hz and the sensitivity is shown numerically while locating points.
Product features
- 4 output channels
- "Loc/Needle/Stim" switch for locating points (Loc) and stimulation (Needle)
- Point location with an acoustic and optical indicators as well as on the display (numerical display)
- Polarity: Changeable for each channel from positive to negative and vice versa
- Dimensions: 15.5 x 10.5 x 6 cm
- Weight: 330 grams (device)
- Made in China
- CE-certified medical device (CE0197)
Accessories
- 4 cable sets
- 1 case made of synthetic leather
- 1 operating manual (English)
Technical Product properties
- Adjustable voltage: Lo (low) for electroacupuncture and Hi (high) for TENS
- Output power: 0 -18 mA (low) 20% (on 500 Ohm load), adjustable 0.40 mA (high) 20%
- Frequency: Adjustable between 1-100 Hz (20%, X1) and 10 - 999 Hz (20%, maximum, X10)
- Pulse width: 350 µs (with X1) or 40 µs (with X10)
- Waveform: Biphasic, square wave
- Digital display of the frequency: 1 Hz to 100 Hz with X1 and 1 - 200 (max.) with X10
- Pulse form: Adjustable between continuous, pulse (modulated) and intermittent
- Power supply: 9 volt battery
- Output socket: Ø 3.5 mm
Review product
No review available for this product.
AWQ-104L Digital Acupunctoscope stimulation device
Recommended article
Customers who viewed this product also viewed the following products.AWQ-104L Digital Acupunctoscope Point Locator and stimulation device for acupuncture
Point Locator and stimulation device for acupuncture. The digital display shows the frequency in Hz and the sensitivity is shown numerically while locating points.
Product features
- 4 output channels
- "Loc/Needle/Stim" switch for locating points (Loc) and stimulation (Needle)
- Point location with an acoustic and optical indicators as well as on the display (numerical display)
- Polarity: Changeable for each channel from positive to negative and vice versa
- Dimensions: 15.5 x 10.5 x 6 cm
- Weight: 330 grams (device)
- Made in China
- CE-certified medical device (CE0197)
Accessories
- 4 cable sets
- 1 case made of synthetic leather
- 1 operating manual (English)
Technical Product properties
- Adjustable voltage: Lo (low) for electroacupuncture and Hi (high) for TENS
- Output power: 0 -18 mA (low) 20% (on 500 Ohm load), adjustable 0.40 mA (high) 20%
- Frequency: Adjustable between 1-100 Hz (20%, X1) and 10 - 999 Hz (20%, maximum, X10)
- Pulse width: 350 µs (with X1) or 40 µs (with X10)
- Waveform: Biphasic, square wave
- Digital display of the frequency: 1 Hz to 100 Hz with X1 and 1 - 200 (max.) with X10
- Pulse form: Adjustable between continuous, pulse (modulated) and intermittent
- Power supply: 9 volt battery
- Output socket: Ø 3.5 mm
Review product
No review available for this product.